With increasing water scarceness worldwide, the need for reliable instrumentation combined with low or no water consumption is continuously rising. Additionally, water works are interested in optimizing their operational expenses, such as the reduction of energy or maintenance costs. How is it feasible to continuously surveil multiple parameters in an effective way to ensure a high quality of drinking water?
The AquaGuard PR 30 was developed as a reliable multiparameter measurement system with zero water loss as it is for the usage directly in the water. The AquaGuard PR 30 measures:
With this instrument, Sigrist is expanding its portfolio in the drinking water industry and addressing the fact of water scarceness. With up to five measurable parameters a broad span of quality points can be covered or derived from it. A measurement of turbidity, conductivity, dissolved Oxygen, and temperature for example can provide some qualitative information on microbiological activites in water
Groundwater catchments can be as low as 30 m below ground. This requires expensive and maintance- heavy installations (pumps, additional lines) to provide water to analytical equipment. Here, the AquaGuard PR 30 is the ideal device as it comes with a cable length of 10 m or 20 m, or according to the waterwork‘s need.
So far, Sigrist has been focusing on measuring water quality parameters in drinking water catchments. However, the AquaGuard PR 30 can also be used in other applications such as:
Parameter | Range |
---|---|
Turbidity | 0 … 4000 FNU (Resolution: 0.001 FNU) |
pH | 0 … 14 |
Redox | -1500 mV … 1500 mV |
Conductivity | 1 … 300‘000 μS/cm |
Dissolved Oxygen | 0.004 … 25 ppm |
Temperature | 0 … 130°C |
Sample conditions | 0 … 50°C, max. 0.5 MPa |