defr Glossar

Solids concentrations in liquids and gases are determined with standardized methods based on filtration and centrifuging, which require separation, drying, and weighing of the solids fraction. These laboratory methods are cumbersome because they can take hours to perform and are practically impossible to automate.

By contrast, the turbidity caused by the solid particles, an optical phenomenon, is well-suited to continuous measurement. The turbidity value determined by measuring the scattered light, either as attenuation of the transmitted light (scatter coefficient) or as scattered light intensity at a specific lateral angle.

A clear correlation exists between the turbidity and the solids concentration of a suspension if the particles' properties, i.e. their refractive index and especially their particle size, are constant. The standard suspension of formazine used for calibration provides a good example of unchanging properties.

Another example is shown in the following Figure: the correlation between the turbidity value in FNU and suspensions of titanium oxide and iron oxide (rust).

Turbidity as a function of concentration of titanium oxide and iron oxide at 620 nm
Fig. 48: Turbidity as a function of concentration of titanium oxide and iron oxide at 620 nm

But even less homogeneous media, such as surface water and groundwater, exhibit a very dependable correlation of solids content with the scattered light. The reproducibility of results is enhanced by the fact that many common separation processes (such as filtration, sedimentation, centrifuging, gas scrubbing, etc.) tend to narrow down the particle size distribution.

In the treatment of exhaust gases, for example, scattered light measurement following electrostatic filters and gas scrubbers yields highly reproducible values for measuring the dust concentration.

In any case, even where compositions fluctuate sharply as in the case of certain industrial wastewaters, continuous turbidity measurement has proven to be a reliable tool for signalling concentration jumps. Dust measurement; Flue gas monitoring

Index

Contact distribution partner

{{selectedCountry.Name}} {{country.Name}}

Please select your businessarea

{{ba.Name}}

Please select

{{area.Name}}

Please select your businessarea

{{ba.Name}}
{{selectedCountry.Name}} {{country.Name}}
{{vm.getBusinessAreaStringByVendor(vendor)}} {{area.Name}}
{{vm.getBusinessAreaStringByVendor(vendor)}}
Leonardo Pio
Responsible for the application: Water, Industrial Processes, Beverages & Food for the regions: AG, LU, NW, OW, VS, BS, BL, SO, BE, FR, NE, VD, GE and JU
Andreas Corradini
Responsible for the application: Water, Industrial Processes, Beverages & Food for the regions: TI, GR, UR, GL, SZ, ZG, ZH, SH, SG, TG, AR and AI Traffic & Environment: whole Switzerland
Ihr Businesspartner für Getränke & Lebensmittel:
Für Wasser, Industrielle Prozesse, Verkehr & Umwelt kontaktieren Sie unseren Hauptsitz.

Your distribution partner for beverages & food:
For water, industrial processes, traffic & environment please contact our headquarters

Ihr Businesspartner für Getränke & Lebensmittel:
Für Wasser, Industrielle Prozesse, Verkehr & Umwelt kontaktieren Sie unseren Hauptsitz.

Your distribution partner for beverages & food:
For water, industrial processes, traffic & environment please contact our headquarters

Contact headquarters

Ralf Isenberg
Sales Manager ScrubberGuard
Öffnungszeiten:
Montag–Freitag 08:00–12:00 und 13:30–17:00
Feiertage & Betriebsferien:
Seppitag: 19. März 2025, Ostern: 18. – 21. April 2025, Auffahrt: 29. Mai 2025, Pfingstmontag: 9. Juni 2025, Fronleichnam: 19. Juni 2025, Bundesfeiertag: 01. August 2025, Maria Himmelfahrt: 15. August 2025, Allerheiligen: 01. November 2025, Maria Empfängnis: 08. Dezember 2025, Betriebsferien: 24. Dezember 2025 – 04. Januar 2026
Opening hours:
Monday–Friday 08:00am–12:00pm und 1:30pm–5:00pm
Public & company holidays:
St Joseph's Day: 19. March 2025, Easter: 18. – 21. April 2025, Ascension Day: 29. May 2025, Whit Monday: 09. June 2025, Corpus Christi: 19. June 2025, Federal Holiday: 01. August 2025, Assumption Day: 15. August 2025, All Saints Day: 01. November 2025, Conception of Mary: 08. December 2025, Company holidays: 24. December 2025 – 04. January 2026