defr Glossar

To facilitate practical interpretation of the turbidity value, turbidimeters are calibrated with a standard suspension. Hence the reading is shown not in the form of the measured light intensity, but as a concentration of the calibration suspension. When a given suspension is measured, therefore, the reading shown means that the liquid in question scatters the same amount of light as the standard suspension of the concentration indicated.

The internationally accepted turbidity standard is formazine. The most common units are:

  • ASBC – “American Society of Brewing Chemists”.American unit used in breweries.

  • EBC (turbidity) – “European Brewery Convention”. European unit used in breweries.

  • FAU – “Formazine Attenuation Units”. Unit used in water treatment for transmitted light measurement (angle 0°) as prescribed by standard ISO 7027.

  • FNU – “Formazine Nephelometric Units”. Unit used in water treatment for measurement at 90° as prescribed by standard ISO 7027.

  • FTU – “Formazine Turbidity Unit”. Unit used in water treatment.

  • NTU – “Nephelometric Turbidity Unit”.

Unit used in water treatment for measurement at 90°
as prescribed by the U.S. EPA (Environmental Protection Agency).

  • TE/F - “Trübungseinheit/Formazin”.German designation used in water treatment.

Conversion table: turbidity units based on formazine:

1 EBC 1 FNU
1 NTU
1 FTU
1 ASBC
EBC 1 0.25 0.014
FNU
NTU
FTU
4 1 0.057
ASBC 70 17.5 1

Due to multiple scatter when measuring high turbidity, the concentration of the calibration suspension shows a non-linear dependence on the measured light intensity.

Figure 7 shows that the curve flattens at high turbidities. SIGRIST instruments therefore save some measuring values on this curve as supporting points in a table. This curve is internally reconstructed from this linearization table by linear interpolation of each supporting point. For this, two adjacent supporting points are each connected by a straight line, as is depicted in Figure 7.

Linear interpolation of the connection between the scattered light intensity and the effective turbidity values of a standard solution in FNU
Fig. 7: Linear interpolation of the connection between the scattered light intensity and the effective turbidity values of a standard solution in FNU

As an example, the light intensity measured in Fig. 7 at 2.4 is depicted as the turbidity value 2708 FNU.

Index

Contact distribution partner

{{selectedCountry.Name}} {{country.Name}}

Please select your businessarea

{{ba.Name}}

Please select

{{area.Name}}

Please select your businessarea

{{ba.Name}}
{{selectedCountry.Name}} {{country.Name}}
{{vm.getBusinessAreaStringByVendor(vendor)}} {{area.Name}}
{{vm.getBusinessAreaStringByVendor(vendor)}}
Leonardo Pio
Responsible for the application: Water, Industrial Processes, Beverages & Food for the regions: AG, LU, NW, OW, VS, BS, BL, SO, BE, FR, NE, VD, GE and JU
Andreas Corradini
Responsible for the application: Water, Industrial Processes, Beverages & Food for the regions: TI, GR, UR, GL, SZ, ZG, ZH, SH, SG, TG, AR and AI Traffic & Environment: whole Switzerland
Ihr Businesspartner für Getränke & Lebensmittel:
Für Wasser, Industrielle Prozesse, Verkehr & Umwelt kontaktieren Sie unseren Hauptsitz.

Your distribution partner for beverages & food:
For water, industrial processes, traffic & environment please contact our headquarters

Ihr Businesspartner für Getränke & Lebensmittel:
Für Wasser, Industrielle Prozesse, Verkehr & Umwelt kontaktieren Sie unseren Hauptsitz.

Your distribution partner for beverages & food:
For water, industrial processes, traffic & environment please contact our headquarters

Contact headquarters

Ralf Isenberg
Sales Manager ScrubberGuard
Öffnungszeiten:
Montag–Freitag 08:00–12:00 und 13:30–17:00
Feiertage & Betriebsferien:
Seppitag: 19. März 2025, Ostern: 18. – 21. April 2025, Auffahrt: 29. Mai 2025, Pfingstmontag: 9. Juni 2025, Fronleichnam: 19. Juni 2025, Bundesfeiertag: 01. August 2025, Maria Himmelfahrt: 15. August 2025, Allerheiligen: 01. November 2025, Maria Empfängnis: 08. Dezember 2025, Betriebsferien: 24. Dezember 2025 – 04. Januar 2026
Opening hours:
Monday–Friday 08:00am–12:00pm und 1:30pm–5:00pm
Public & company holidays:
St Joseph's Day: 19. March 2025, Easter: 18. – 21. April 2025, Ascension Day: 29. May 2025, Whit Monday: 09. June 2025, Corpus Christi: 19. June 2025, Federal Holiday: 01. August 2025, Assumption Day: 15. August 2025, All Saints Day: 01. November 2025, Conception of Mary: 08. December 2025, Company holidays: 24. December 2025 – 04. January 2026